ALDI 10367 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 32

ALDI 10367 Скачать руководство пользователя страница 21

18V Rotary Grinder

AFTER SALES SUPPORT

(toll free)

MODEL No.: DC-180E-1 • 07/2019 10367

e-mail: [email protected]

AUS

19

1300 889 028

AUS

Operation

WARNING:

●

After connecting the adapter with the machine, make sure

the on/off switch is in the “O” position before connecting the

adapter to the power supply.

●

Never press the locking button of the tool holder during use!

It may only be pressed when changing the tool!

●

The tool holder may still rotate even after the machine is

switched off. Allow the tool holder to stop by itself. Do not

press the spindle lock button to force it to stop.

Switching on and off (see fig. D)

1) Connect the adapter with this machine, and then connect to a

proper power supply.

2) To start the tool, press the on/off switch (6) to “I” position. To stop,

press the on/off switch (6) to “O” position.

Using the mini drill

WARNING:

●

Make sure the on/off switch is in “O” position first before

you connect the plug of the adapter to the socket.

NOTE:

●

Always test the respective grinding and engraving tool first on a

D

«
...
19
20
21
22
23
...
»

Содержание 10367

































Отзывы:

Нет отзывов