Alcorn Mcbride 8 TraXX, Руководство пользователя

Страница: 15 / 33

Keylock Control
Description: This command is used to disable the front panel pushbuttons of the 8TraXX.
Command Bytes: nKL<CR>
where n is “0” for disable front panel pushbuttons, “1” for enable pushbuttons
Message Response: R<CR>
Version Request
Description: This command is used request the operating system version.
Command Bytes: ?V<CR>
Message Response: Alcorn McBride 8TraXX Vxx.xx<CR>
Where xx.xx is the current version of the installed firmware.
Note : The firmware version can also be obtained by holding down the 8
th
front panel channel button as power is
applied to the 8TraXX. The channel LEDs on the front panel will indicate the version as XXXX.XXXX, where
the first four LEDs indicate the binary whole number and the last four LEDs indicate the binary decimal
number part of the version.
For example (‘X’ is LED on, ‘O’ is LED off)
OOOXOXOX indicates firmware version 1.5
After this operation, the 8TraXX must be power-cycled to reboot.
August 8, 2006 • Alcorn McBride 8TraXX User’s Manual • Rev 1.8 • Page 9