AlcoMate Alcoscan AL2500, Руководство оператора

Страница: 6 / 8

6
Troubleshooting

WARNING DISPLAY “ bAt ”: If you see “bAt” in the display, the battery power is low. Please replace
the batteries with a new pair. Make sure to properly align the batteries by looking at the +/- marks.

WARNING DISPLAY
" Er ": If this code appear in the display, the device is reporting a general
problem with the alcohol sensor, or that the device has been physically damaged. Please
purchase a new device.

For the other troubles, please contact AK GlobalTech at support@alcomate.net , along with your
error codes and photos if available.
- Specifications -
Method of Measure Breath sample to BAC
Detection Range 0.00% - 0.40% (Accuracy: +/- 0.01% up to 0.10% BAC)
Sensor Oxide semiconductor
Power Two 1.5V AA alkaline batteries (included)
Warm-up Time Less than 1 minute
Testing Capacity Approx. 200 with new batteries
DOT Approved YES
Operating Temperature 50 - 104 degrees Fahrenheit or
10 - 40 degrees Celsius
Warm Up Less than 1 minute
Display 3-Digit LCD (0.00)
Dimensions 4.1 H x 1.6 W x 0.8 D
Weight 3 oz
Sensor Module Sensor modules should be replaced every 200 tests or at least once yearly
(whichever comes first).
Warranty One (1) Year (Refer to "Warranty" section)
- Limited Warranty -
Manufacturer's Warranty Coverage
AK GlobalTech Corporation warrants the AlcoScan AL2500 to be free from defects in workmanship or
material, excluding spent or used sensor modules, under normal use for one (1) year from the date of
purchase. AK GlobalTech's obligation under this warranty is limited to replacing, adjusting or repairing
the unit only if returned along with proof of purchase, complete shipping address, daytime contact