ALcom FX-79, Руководство пользователя

Страница: 16 / 22

receive at strong signal.
Channel Scan
Use scanning to monitor channels and codes for transmissions or to find someone
in your group who has accidentally changed channels.
To start scanning, briefly press key. The scan indicator
is shown.
When the radio detects channel activity, it stops scanning and you can hear the
transmission. To respond to the transmission, press
PTT
within 5 seconds.
To exit the function, press key again.
Note: If your radio’s Interference Eliminator Code is set to 0 while scanning, the
radio checks for activity on each channel regardless of the code used on the
channel. If your radio’s Interference Eliminator Code is set to 1-38 and ignores
channels using code 0.
Scan Advance
If scan stops on a channel that you don’t want to listen, briefly press or
button to resume scanning for the next active channel.
Removing Channels form the Scan List
To remove a undesired channel so the radio does not stop on it while scanning,
press and hold or for at least 3 seconds, then release. This temporarily
removes the channel from the scan list. You may remove more than one channel in
16