2.
Press ▲ or ▼ key to select “SETUP BS” and press
key.
3. Press ▲ or ▼ key to select “CHange PIN” and
press
key, the LCD will show “ENter PIN”.
4. Press number key to input the old PIN code and
press
key, the LCD will show “New PIN”,
prompt you to input a new PIN code.
Note
: “Wrong PIN” will be shown if the old PIN code
You input is wrong, and then return to step 4.
5. Input the desired new PIN code and press
key,
the LCD will show “REpeat PIN”, prompt you to
input the new PIN code again.
6. Input the new PIN code again and press
key
to confirm the setting.
Note
: 1. The PIN code must be 4 digits.
Dial Mode
You may set the dial mode to “TONE” or “PULSE”
according to your needs. The default setting is “Tone”.
1. Press
key.
2. Press ▲ or ▼ key to select “SETUP BS” and press
key.
3. Press ▲ or ▼ key to select “Dial mode” and press
Key.
4. Press ▲ or ▼ key to select “Tone” or “Pulse”.
5. Press
key to confirm the setting.
Recall Time
You may select flash time from 100ms to 800ms
according to your needs. The default setting is 600ms.
-
24
-
