ALcom AT2322, Руководство пользователя

Страница: 5 / 6

User’s Manual
4
insert it again in reverse. So the backer can hold and keep the handset not to drop
down.
10) Ringing volume
There are two levels for the ringing volume control: HI & LO for selection. If you
don't want ringer to be loud during incoming calls, slide the RING switch which is
located at the bottom of the unit to LO position.
Please note ringer cannot be set to OFF.
11) P-T key function
If use pulse dialing mode, during a conversation, to change the dial mode, for
example, to use the special services that need tone dialing mode, press P-T key to
change the dial mode to TONE temporary, it returns to PULSE dialing model when
hang up.
12) Ring indicator
When there is an incoming call the RING Indicator will Flash.
TROUBLESHOOTING
Trouble Check Solution
No dial tone
Whether the handset cord
or line cord is connected
Connect them properly or
change the line cord or handset
cord accordingly.
Cannot dial
any call but
can receive
calls
Check if you have chose
the correct dialing system
required by your
Telephone service provider
Choose the correct dialing
mode using the P/T switch
Noise
Please check if the line
cord or wall plug is
moistured.
Replace the Line cord or
change the wall socket
accordingly.
Ring once only
while still can
make a call
Please check the line connection ,check if too many phones
are connected in the same line, or the wall socket or Tel line
cord is moistured.