ALcom AT2322, Руководство пользователя

Страница: 4 / 6

User’s Manual
3
OPERATION
1) Preparation
1.1 Connect the line plugs into phone line jack and the other plug to connect to the
wall jack.
1.2 Insert the handset coil cord into the phone jack at the bottom.
1.3 Set the dial mode according to local network, while T refers to Tone dialing and
P refers to pulse dialing.
2) Receiving
As it rings, pick up the handset from the cradle to answer, and put back the
handset to hang up to end the conversation.
3) Dialing
Pick up the handset
,
dial the desired number when you hear the dialing tone
.
If you
hear a ring back tone, the line has got through. If you hear a busy tone, you could
press the hook switch then press REDIAL to dial it out again after some time. You
could repeat the above process till getting the line through.
4) Redial
Pick up the handset, press the REDIAL button, the unit will redial the last number
automatically.
5) Pause
The key is used for inserting a 3.6s pause in the dialing process. If you want to dial
out from the extension phone, press PABX code (normally “0” or “9”) + PAUSE +
desired number, then you could just press FLASH key and then press REDIAL to
dial out again when the dialed number is busy.
6) Flash
When you dial a number and the line is busy, press FLASH key and then press
REDIAL key to dial it out again.
Press FLASH button to answer call waiting line(second call). Press FLASH button
again to get back to the first line.
7) Pulse/Tone
Slide the mode switch to T for tone dialing while P for pulse dialing accordingly.
8) Mute
When making a phone call, if you need to talk with someone else beside you and
you don’t want the other party to hear your conversation, press and hold MUTE
key. To return to conversation, release the MUTE key.
9) Wall Mountable
The phone can place on the Desk or Wall mounted.
Before mounting it on wall, pull out the handset backer near hook switch, and then