6
B4600 Battery-Powered Tool (
HK1189
) Alcoa Fastening Systems & Rings
DRIVE UNIT:
Brushless direct current motor
WEIGHT:
3.9 lbs (1.7 kg) without battery or nose piece
4.4 lbs (2.0 kg) with battery
STROKE:
.985 in. (2.5 cm)
PULL CAPACITY:
4496 lb
BATTERY AND CHARGER:
18V battery; 100-240V/50-60Hz charger
Battery rated for 2.1 Ah
Optimum operating temperature range: 50-122°F (10°-50°C)
Full charging takes approximately 40 minutes. (Charging
times may vary according to the remaining capacity and the
battery temperature.)
One battery can be charged approximately 1000 times.
One fully charged battery will install approximately 500
fasteners. Number of fastener installations may vary based
on the age of the battery and the size and strength of the
fastener.
The tool battery has a display showing battery life in percent.
Press the button in the display to activate the green LED
lights for approx. 5 seconds, and use the table at right to
determine capacity.
P
rInCIPle
of
o
PeratIon
D
esCrIPtIon
This battery powered installation tool is designed to install
up to -08 MGL and up to -06 MG and is compatible with
standard “L” version noses. Specially designed for low-
volume production environments, this installation tool
is portable, with no hoses or cords. Batteries are easily
replaced and/or recharged when they have been depleted
of life.
11.22
(28)
2.99
(7.0)
1.06
(2.3)
2.68
(6.8)
11.42
(29)
1.5
(3.8)
4.45
(11.3)
inches
(cm)
The nose assembly is placed over the end of the fastener
until the tool’s anvil bottoms on the fastener. When the
trigger is pressed, the drive unit draws the collet rearward
and breaks the pintail of the fastener in tension. After the
fastener pintail is broken, the trigger must be released, at
which point the drive unit returns the collet forward. The
tool is then ready for the next fastener.
s
PeCIfICatIons
INDICATOR
EXPLANATION
Constant GREEN Battery is fully charged.
Flashing GREEN Battery is charging.
Constant RED Charging temperature error (Battery too
hot or too cold)
Flashing RED
Battery is defective, or wrong battery
BATTERY FUNCTION LIGHTS
BATTERY FUNCTION LIGHTS
INDICATOR
EXPLANATION
Battery is fully charged.
Battery is at 80% capacity.
Battery is at 60% capacity.
Battery is at 40% capacity.
Battery is at 20% capacity.
