alchemy Pi-UpTime UPS 2.0 Скачать руководство пользователя страница 8

Страница: 8 / 15

All information subject to change without notice.

Tiny-UPS

PiZ-UpTime 2.0

Pi-UpTime UPS 2.0

Temperature

Not applicable as
battery is external

Board temperature is
provided. When it is
too hot or too cold, the
Pi can be shutdown.
Sample routine will
need modification

Board temperature is
monitored and BMS
disables charging when
it is too hot or too cold

Shutdown Trigger

External when battery
is low

Software driven, with
check for battery low
and Power off

Battery Management

CC-CV charging.
Battery charge level
maintained over time

CC-CV charging. Battery
charge level
maintained over time

Additional Battery
Safety

Max charge current
monitoring

Provides board
temperature. Software
can decide what to do
next. Max charge
current monitoring

Active temperature
monitoring. Battery
charging is disabled

when it’s too hot or too

cold. PTC fuse
protection between
batteries to prevent
current loops. Max
charge and use current
monitoring & current
limits

Current limit

Only for charge current Only for charge current Charge current and

max current
monitoring

Board Color

Green

Black

Board dimensions

35mm x 28mm x 12mm
4 mounting holes. Can
be mounted on a Pi-
Zero.

65mm x 30mm x 12mm
Bottom connector
11mm. Ideal for
mounting on a Pi-Zero.
Can be mounted on Pi-
A or Pi-3 family

85mm x 56 mm x
22mm (with 18650
battery holder).
Bottom connector
13.5mm

Mounting

4 mounting points.
Long edge aligns with
Raspberry Pi-Zero short
edge for mounting

Mounts to Raspberry Pi
Zero. Long edge aligns
with Raspberry Pi-3 or
Pi-A dimensions.
Recommend 11mm
spacers.

Designed to mount on
Raspberry Pi-4, Pi-3.
Recommend 20mm
spacers.

Recommended spacers Depends on unit

connected to. For Pi-
Zero, 11 mm or 15 mm
spacers recommended

For Pi-Zero, 11 mm
spacers recommended

For a Pi-3 or Pi-4,
20mm spacers
recommended

Board weight

15 grams

20 grams

50 grams

UPC Code

708088352553

708088352577

708088352584

Содержание Pi-UpTime UPS 2.0













Результаты поиска

Содержание Pi-UpTime UPS 2.0

Отзывы:

Похожие инструкции для Pi-UpTime UPS 2.0

Бренды по названию

Популярные бренды

alchemy Pi-UpTime UPS 2.0, Руководство пользователя

Результаты поиска

Содержание Pi-UpTime UPS 2.0

Отзывы:

Похожие инструкции для Pi-UpTime UPS 2.0

Бренды по названию

Популярные бренды