alcatraz ROCK-1, Инструкция по установке

Страница: 3 / 5

READER
PANEL
Thread cables through and attach
wall plate to 2-gang box Wire cable harness to badge reader
and access control panel
Step 3 – Step 2 –
Connection Overview
Minimum Required Connections
Caution: Incorrect wiring may cause permanent damage
Wire the badge reader and Access Control system as required for your installation
For installations that require 1-Wire LED control, connect the ORANGE wire (Panel
LED Green) to the LED terminal on the panel
Attach wall plate to 2-gang box with provided screws, paying attention to
point the arrow towards door
Installed screw heads must be flush to the wall plate. Protruding screw
heads will cause interference when installing the Rock onto the wall plate
Use edge of tunnel to level wall plate
Arrow towards door
PoE+ Ethernet
Wiring harness
Alcatraz
Rock
Shielded
Cat5e/Cat6
Badge
Reader
Badge
Reader
Ac
cess
Control
P
anel
Access
Control
Panel
PoE+ Ethernet
Wiegand/OSDP Cable
RED
BLACK
GREEN
WHITE +12v
GND
D0
D1
+12v
GND
D0
D1
LED Green
RED
BLACK
GREEN
WHITE
ORANGE
PoE+ input power: 42-57 VDC 0.5
A
Refer to enclosed Installation Guide part number 541-0001-00-00 Rev 01 for Wiring Diagram
.
Alcatraz AI
, inc.