15
16
Removing and installing the battery
Insert and click the battery into place, then close the telephone cover.
Unclip the cover, then remove the battery.
Charging the battery
Connect the battery charger to your phone and mains socket respectively.
•
LED light will be on when it is charging, and be off when battery is fully
charged.
•
Charging may take about 20 minutes to start if the battery is flat.
•
Be careful not to force the plug into the socket.
•
Make sure the battery is correctly inserted before connecting the charger.
•
The mains socket must be near to the phone and easily accessible
(avoid electric extension cables).
•
When using your telephone for the first time, charge the battery fully
(approximately 3 hours). You are advised to fully charge the battery
(
).
To reduce power consumption and energy waste, when battery
is fully charged, disconnect your charger from the plug; switch
off Bluetooth when not in use; reduce the backlight time, etc.
1.2
Power on your phone
Hold down the key until the telephone powers on, type in your PIN
code if necessary and then confirm with the key. The Home screen
is displayed.
If you do not know your PIN code or if you have forgotten it, contact
your network operator. Do not leave your PIN code with your telephone.
Store this information in a safe place when not in use.
If Broadcast SMS are displayed, use the key to browse through them
or press the to return to the Home screen.
While the phone is searching for a network, "
Searching/Emergency
"
will be displayed.
1.3
Power off your phone
Hold down the key from the Home screen.
