7
INSTALLATION OR REPLACEMENT OF BATTERIES
Your phone uses 3 LR6 1,5 V batteries, which are not supplied with the set. To avoid
damaging your set, only use leakproof batteries. When nothing is shown on the display,
you have to replace the batteries.
Place/Replace the batteries as described below:
• For safety reasons, disconnect the telephone line cord from the wall socket.
• Open the battery compartment which is found on the bottom of the set.
• Remove the used batteries and put the new ones in position, taking into account the
+ and – polarities as shown engraved on the plastic inside the battery
compartment.
• Close the battery compartment and connect the telephone set.
• Adjust date and time, all the other informations are saved.
• The lifetime of batteries is around 1 year in normal conditions of use.
• When batteries become weak, the battery icon starts flashing
; you have to repla-
ce your batteries as soon as possible.
NOTE : Without batteries or with empty batteries, your
TEMPORIS 32
will work as a basic
telephone: you may dial in off-hook and receive a call; all the other features are
disabled.
PRECAUTIONS OF USE
Caution, never bring your telephone set in contact with water.
To clean your set however, you may use a damp cloth.
Never use solvents (trichlorethylene, acetone, ...) which may damage the plastic sur-
faces of your telephone set. Never spray cleaning products on your set.
During storms, it is advised not to use the set.
DECLARATION OF CONFORMITY
• This product is designed to be connected to an analog telephone line classified
TNV3.
• This product complies with the disposition of the directive 1999/5/EC of the European
Parliament and of the Council of 9 March 1999 on radio equipment and
Telecommunications Terminal equipment and the mutual recognition of their conformity.
• The certificate of conformity is available from the following Internet site:
“www.atlinks.com”.
Temporis_32_uk.qxd 03/08/01 11:47 Page 7
