Alcatel Speed Touch Wireless, Руководство пользователя

Страница: 153 / 362

9 Data Services - Classical IP & IP Routing
153 / 362
3EC 17766 AAAA TCZZA Ed. 01
9.2.2 Retrieving LIS Parameters
The LIS is an important CIP concept. It is a group of IP machines
configured as members of the same IP subnet. In other words:
they share the same IP network and subnetwork numbers.
In most cases this LIS will be a corporate (W)LAN/WAN
environment, which is interconnected via the ADSL/ATM network.
In order to be able to properly configure your STWireless for
sharing the same logical IP subnet, you must know the following
LIS parameters:
"
The IP network number
"
The IP subnetwork number
"
The remote access router's RFC1577 compliancy state
"
The remote access router IP address, in the case it is not
RFC1577 compliant.
Of course, in case you know the IP address of one member of the
LIS, and the associated netmask, you also have enough
information.
For an existing LIS, you must configure the STWireless CIP
settings, according to the existing LIS parameters.
If the default CIP member's IP parameters, and the CIP
connection's remote IP address, configured in the STWireless ,
match with these parameters, nothing needs to be configured.
However, make sure that the CIP member's local IP address is not
ambiguous within the LIS.
In the case of creating a new LIS, you are recommended to use
the default CIP configurations of the STWireless . In case the
remote access router is also a STWireless , best results are
assured.
Note : Both ends of the LIS must be properly configured for
connectivity, inclusive the routing tables.