Alcatel Speed Touch Wireless, Руководство пользователя

Страница: 107 / 362

7 Data Services - PPPoAĆtoĆPPTP Relaying
107 / 362
3EC 17766 AAAA TCZZA Ed. 01
Field Description
HDLC
Framing
(continued)
Value Description
Never
Always
The STWireless will make sure that
FFĆ03 is always in front of a PPP frame
encapsulated on an AAL5/ATM
connection. Although not supported by
RFC2364, some equipment may rely
on this format.
Keep The STWireless will not change the
PPP frame arriving via a tunnel.
The STWireless will make sure that
FFĆ03 will never be found in front of a
PPP frame encapsulated on a
AAL5/ATM connection, independent of
the actual format of the PPP frame in
the tunnel. This setting is default, and
follows RFC2364.
Note : This configuration possibility applies only to the upstream
direction ! In the downstream direction, the STWireless will
always make sure that FFĆ03 is in front of the frame prior to put
it in aPPTP tunnel.
In order to cope with these PPP frame differences, the
STWireless adapts to the different formats on a 'per
connection' base.
Additionally, the
STWireless offers the following PPP/AAL5
format configuration options via the CLI if interoperability
problems should arise (See section 7.5 for more information):
State Indicates the connection state of the active PPTP connection. It
can take following values:
Value Description
Resolving
In Use A user opened asession on this PPTP
entry.
The PPTP entry is setting up the
connection.
Retry The PPTP entry did not succeed in
connecting to the remote side, and is
retrying.
User Indicates the IP address of the host, i.e. PC, using this PPTP
connection
PPTP profiles can be configured via the CLI.
See section 7.5 for more information.