Alcatel Speed Touch USB PPPoE, Руководство пользователя

Страница: 52 / 60

Solution table
AppendixA Troubleshooting
52 / 60
3EC 17545 AAAA TCZZA Ed. 02
Your is equipped with two Bicolored LEDs (See appendix B
for more information). These indicators may help you to sort out
the problem.
Indication & Problem Solution
Speed Touch

USB
does not work:
No LEDs light up.
There is no power
supplying connection.
Verify the Speed Touch

USB connections, as
described in subsection 1.2.3.
Check if the
Speed Touch

USB 's cord is
damaged in any way.
When using a portable PC in battery mode, it is
possible that its USB port is not powered. Refer to
the portable PC's User Manual for more
information.
Check if the
Speed Touch

USB is not connected
to a lowpowered USB hub port. Refer to the USB
hub's User Manual for more information.
Speed Touch 
USB
is
recognized by the
installation wizard,
but installation failed.
Verify your PC is running Windows 98, Windows
98SE, Windows ME, or Windows 2000 and that it
meets the according minimum requirements (See
subsection 1.2.1).
Check whether the
Speed Touch

USB is not
connected to a lowpowered USB hub port. Refer
to the USB hub's User Manual for more
information.
USB LED flashes red,
or stays solid red.
Your USB port congests, meaning that too much
traffic is passing through the port. Avoid using
multiple high speed USB devices, e.g. scanners,
speaker, etc. during heavy duty, e.g. a data
download.
Both USB LED and
ADSL LED are solid
amber.
Power On Self Test (POST) failed. See chapter
1.2.3 to check whether the connections are
correctly made.
Windows Error 730.
(Windows98/98SE)
TCP/IP is not installed on your PC. Install TCP/IP
protocol suite on your PC.