5
6
Getting started
1.2
Set-up
1.2.1
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card,
press and slide it out.
Installing or removing the battery
Please power off your phone before removing the battery.
Insert and click the battery into place, then close the cover.
•
Unclip the cover, then remove the battery.
•
Installing the microSD card
To install, please open microSD card lock first, and then place the
external microSD card into the slot with the gold contact facing
down. To remove the external microSD card, please open microSD
card lock and take it out from the slot.
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
The charging status bar will not float if your battery is
extendly consumed. To reduce power consumption and
energy waste, when battery is fully charged, disconnect your
charger from the plug; switch off Wi-Fi, GPS, Bluetooth or
background-running applications when not in use; reduce
the backlight time, etc.
IP4705_4033X_QG_Eng_GB_19_130725.indd 5-6
IP4705_4033X_QG_Eng_GB_19_130725.indd 5-6
2013-7-25 5:56:00
2013-7-25 5:56:00
Downloaded from www.vandenborre.be
