2
Getting started ....................
2.1
Set-up
Inserting and removing the SIM card
(1)
In order to make or receive calls, you must insert your SIM card as
illustrated below.
16
Place the SIM card with the bronze colored chip facing downwards and slide it into
its housing. Make sure that it is correctly inserted.To remove the card, press the SIM
card firmly and slide it out. Please power off your phone before you remove the SIM
card.
Installing the battery
Insert and click the battery into place, then close the telephone cover. Do not
force the battery, as this may cause damage to the battery and or phone.
(1)
Check with your network operator to make sure that your SIM card
is 3V compatible. The old 5 Volt cards can no longer be used. Please
contact your operator.
WAP alerts
(1)
.
Roaming
.
Memory card scanning in progress
.
Memory card scanning completed
.
Double line
(2)
: indicates the selected line.
GPRS connection status
(Blue - Activated).
Multimedia player active
.
USB cable connected
.
Reception of a message in progress
.
Sending a message
.
Silence mode
: in silence mode, your phone will not ring or
vibrate, but alarms set will still sound (see page 39).
Message unread
Message list is full
: your terminal cannot accept any new
messages.You must access the message list and delete at least one
message on your SIM card.
Preferred network area
(2)
.
Antenna off/Airplane mode
.
A2DP connected
.
15
(1)
Depending on your network operator.
(2)
Contact your network operator to check service availability.
650_UM_USA_25-08-08 25/08/08 12:22 Page 15
Содержание One Touch PRO
Страница 1: ...650_UM_USA_25 08 08 25 08 08 12 22 Page 1...