Alcatel one touch Pop icon, Руководство пользователя

Страница: 9 / 60

17 18
1.2 Getting started
1.2.1 Setup
Removing or installing the back cover
Installing or removing the battery
Please power off your phone before removing the battery.
• Insert battery into slot until locked in position, then close the battery
cover.
• Remove battery cover and unlock battery from slot, then remove.
Installing or removing the microSD card
To install a microSD card, Place the microSD card into the slot with the
gold contacts facing downward and gently insert the SD card until it locks
into the slot. Insert battery into slot until locked in position, then close
the battery cover.
To remove it, remove the battery cover and battery, slide the microSD
card from slot gently.
Before inserting/removing the MicroSD card, you should ensure the
phone is off, to protect it from data corruption or damage. Regularly
removing or inserting the MicroSD card may cause the smartphone
to restart.
Charging the battery
Connect the battery charger to your smartphone and wall outlet, then the
charging icon will show on the right of status bar.
If the battery is very low, there will be no indication that power is
being received until the charge is sufficient to show the charging
status bar. It may take up to 20 minutes to display the battery
charger indicator on the screen. To reduce power consumption
and energy waste, when battery is fully charged disconnect your
charger from the plug; switch off Wi-Fi, Bluetooth or background-
running applications when not in use; reduce the backlight time,
etc.