Alcatel OmniSwitch 6624, Руководство по настройке сети

Страница: 34 / 546

Ethernet Ports Overview Configuring Ethernet Ports
page 1-6 OmniSwitch 6624/6648 Network Configuration Guide April 2004
Ethernet Ports Overview
This chapter describes the Ethernet software CLI commands used for configuring and monitoring your
switch’s Ethernet port parameters. These commands allow you to handle administrative or port-related
requests to and from SNMP, the CLI or WebView.
OmniSwitch 6648
The OmniSwitch 6648 provides 48 10/100 Mbps ports and two expansion slots. The expansion slots are
empty by default. Optionally, they can hold either four Gigabit Ethernet ports or two Gigabit Ethernet
ports and two stacking connections. Port numbers 1 through 48 support both 10 Mbps Ethernet and 100
Mbps Fast Ethernet interfaces. Port numbers 49, 50, 51 and 52 support 1000 Mbps Gigabit Ethernet when
the Gigabit Ethernet modules are installed. For more information on Ethernet hardware configurations,
refer to the
OmniSwitch 6600 Series Hardware Users Guide .
The OmniSwitch software supports the Gigabit Ethernet expansion modules listed in the table here.
Module Description
OS6600-GNI-C2 2 port 1 Gbps Gigabit Ethernet copper uplink module. This module supports
1522 bytes if frame 802.1Q is tagged. Otherwise, 1518 bytes are supported.
OS6600-GNI-U2 2 port 1 Gbps Gigabit Ethernet fiber uplink module. This module supports 1522
bytes if frame 802.1Q is tagged. Otherwise, 1518 bytes are supported.
CONSOLE
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
1
2
EXPANSION/STACKING
EXPANSION
49 50 5 1 5 2
TM
OmniSwitch 6648
OK1
OK2
PS1
PS2
PRI
SEC
TEMP
FAN
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
25
26
LINK/ACT
LINK/ACT
LINK/ACT
LINK/ACT
SEL
10/100 Ethernet Ports 1 through 48 Optional Stacking or Gigabit Ethernet Modules,
Ports 49, 50, 51, and 52