Alcatel-Lucent OmniSwitch 6450, Руководство по началу работы

Страница: 12 / 22

8 Your First Login Session May 2012
The default welcome banner, which includes information such
as the current software version and system date, displays—
followed by the CLI command prompt:
Welcome to the Alcatel-Lucent OmniSwitch 6450 Series
Software Version 6.6.3.R01, April 16, 2012.
Copyright(c), 1994-2009 Alcatel-Lucent All Rights reserved.
OmniSwitch(TM) is a trademark of Alcatel-Lucent registered
in the United States Patent and Trademark Office.
->
More Information on User Accounts. A user account
includes a login name, password, and user privileges.
Privileges determine whether the user has read or write
access to the switch and which commands the user is
authorized to execute.
For detailed information on setting up and modifying user
accounts and user privileges, refer to the “Managing
Switch User Accounts” chapter of your
Switch Manage-
ment Guide.
Assigning an IP Address to the
Switch
Assigning an IP address to your OmniSwitch 6450 switch is an
important step in the setup process.
Remote sessions such as Telnet, FTP, and WebView require
an IP address. The IP address for these session types serves as
a destination point for the remote session. Therefore, before
the switch can support any remote login sessions, a valid IP
address must be configured.
To assign an IP address to a switch, simply assign an IP
address to the switch’s default VLAN 1 by entering the
ip interface command at the CLI prompt. Type the following
command exactly as shown .
-> ip interface vlan_1_name address
172.2.120.1 vlan 1
The command above assigns the IP address 172.2.120.1 to
VLAN 1. The parameter “vlan_1_name” is a descriptive name
of the interface and can be any text string.