All Rights Reserved © Alcatel-Lucent 2009
Page 4
The two files have the same list of parameters.
Parameter values from the
sipconfig-
MacAddress
.txt
file override parameters of the
sipconfig.txt
file. This applies only when the concerned parameter has been assigned a value
in the
sipconfig-
MacAddress
.txt
file.
Examples 1:
user name
parameter
In the file
sipconfig.txt
the parameter
user name
is set to
Alcatel-Lucent
. As a result, all sets of
the system have the same name:
Alcatel-Lucent
.
For the set with MAC address 00:80:9F:56:07:AE, the file
sipconfig-00809F5607AE.txt
exists and
contains the parameter
user name = Smith
. As a result, this set is called:
Smith
and not:
Alcatel-
Lucent
.
Examples 2:
proxy_addr
parameter
In the file
sipconfig.txt
the parameter
proxy_addr
is set to
192.168.110.80
. As a result,
all sets share the same proxy.
For the set with MAC address 00:80:9F:56:07:AE, the file
sipconfig-00809F5607AE.txt
contains the parameter
proxy_addr
. This parameter has no assigned value. As a result, this set
uses the proxy defined in the
sipconfig.txt
file.
sipconfig.txt
and
sipconfig-
MacAddress
.txt
files are built with the SIP Device
Management application (SDM).
For more information on the structure of the sip configuration files, see:
§ SIP Configuration Files
Description
.
When the set is registered with success, all parameters are saved in the non volatile memory
(flash memory) of the set. Saved parameters are used in case of TFTP server failure.
2.1.2.
SIP Set Binaries
The SIP binary files must be set in the server in the same location as the
sipconfig.txt
and
sipconfig-MacAddress.txt
configuration files.
The available binary files for Alcatel-Lucent IP Touch 4018 EE phone Extended Edition sets are:
– noesip4018
(application)
– datesip4018 (resources including the ringing melodies)
Except for their name, Alcatel-Lucent IP Touch 4008 EE phone Extended Edition set binary files
are identical.
