Release Note for 8234, 8254 DECT Handset R100
TC2758 ed.
06
© Copyright 2021 ALE International, ALE USA
page 17/26
8
Support of Alcatel-Lucent Solutions
8.1
OXE
This new DECT handset type is supported on IBS, RBS and xBS systems. It is also supported on IP-DECT
systems with some restrictions. The TR version has not the right firmware. If you upgrade to an upper version
MD1 (patch M5.204.7.c) and beyond, the phone will update with SUOTA, but it will be blocked after.
A power on/off is required. It is mandatory to install the sets in MD1 patch to avoid this issue.
Interaction with older OXE releases
The new DECT handset 8234/8254 is supported from R12.3 release (M4) under the following conditions:
- Can be registered on release 12.3.x but is seen as an 8232 type. After migration in R12.4 & above it will be
still seen as an 8232.
- Telephonic features are fully supported
- Tools display these handsets as 8232
- Software upgrade is not available and should not be activated for these phones
If sets were installed in R12.3.x after migration they have to be re-registered as 8234/8254 to take advantage
of SUOTA & maintenance tools. As a telephonic point of view, they will work the same.
The ideal is to start working with 8254 in 12.4 M5.204.7c (M5 MD1).
8.2
OXO Connect and OXO Evolution for 8254
OXO Connect
Releases
Terminal type Identification/Compatibility
IBS-DECT sub system
IP-xBS sub system
IP-DECT sub system
OXO Connect >=
R4.0
8254 DECT Handset
8254 DECT Handset
Supported in GAP
mode
8254 identified as
8232
OXO Connect >=
R2.2 and OXO
Connect < R4.0
8232 DECT Handset
8232 DECT Handset
Supported in GAP
mode
8254 identified as
8232
OXO Connect < R2.2
Not Supported
Not Supported
Not Supported
For OXO evolution, it works for release >= 4.0 with IP-xBS
For OXO evolution 3.0, it works with IP-xBS but the 8254 has to be identified as 8232.
8254 DECT Handset can be associated with OCO/OCE applications.
