Alcatel-Lucent 7710 SR SONET, Руководство по настройке

Страница: 42 / 496

Ports
Page 42 7710 SR OS Interface Configuration Guide
Figure 1: MLPPP 24-bit Fragment Format
Figure 2: MLPPP 12-bit Fragment Format
The required and default format for MP is the 24-bit format. During the LCP state the 12-bit
format can be negotiated. The SR-series routers can support and negotiate the alternate 12-bit
frame format.
Protocol Field (PID)
The protocol field is two octets its value identifies the datagram encapsulated in the Information
field of the packet. In the case of MP the PID also identifies the presence of a 4-octet MP header
(or 2-octet, if negotiated).
A PID of Ox003d identifies the packet as MP data with an MP header.
The LCP packets and protocol states of the MLPPP session follow those defined by PPP in RFC
1661,
The Point-to-Point Protocol (PPP) . The options used during the LCP state for creating an
MLPPP NCP session are described below.
B & E Bits
The B&E bits are used to indicate the epoch of a packet. Ingress packets to the MLPPP process
will have an MTU, which may or may not be larger than the MRRU of the MLPPP network. The
B&E bits manage the fragmentation of ingress packets when it exceeds the MRRU.
1
1
0 1 2 3 4 5 6 7 8 9
1
0 1
2 1
3 1
4 1
5 1
7 1
6 1
8 1
9 2
0 2
1 2
3 2
2 2
4 2
5 2
6 2
7 2
9 2
8 3
0 3
1
Control 0x03 PID 0x003d Address 0xff
Sequence B E
Fragment Data...
FCS Fragment Data
1
1
0 1 2 3 4 5 6 7 8 9
1
0 1
2 1
3 1
4 1
5 1
7 1
6 1
8 1
9 2
0 2
1 2
3 2
2 2
4 2
5 2
6 2
7 2
9 2
8 3
0 3
1
Control 0x03 PID 0x003d Address 0xff
B E
Fragment Data...
FCS Fragment Data
Sequence Fragment Data ...