8AL90387ENAAed0a
46 /60
8.2 Registering the telephone on other systems
The telephone can be registered on several systems (maximum of 4).
Note: the input is usually reserved for use with your main Alcatel-Lucent system. You can select the other
inputs to register the telephone under another system (Alcatel-Lucent or other system).
8.2.1 To make a new registration, when the telephone has already been registered on one or
more systems, proceed as follows:
1. Prepare your system for registration (see the system installation manual or consult your installation
manager).
2. When the system is ready:
•
Access MENU.
•
Install
•
Register
•
Enter the PIN Code.
•
Apply.
•
Select a system.
•
Enter PARK code (Enter nothing if not mandatory).
•
Apply.
•
Enter access code (Enter nothing if not mandatory).
•
Apply
•
Select Power mode.
•
Enhanced Security
•
Yes / No
Call from encrypted system to un-encrypted system is accepted (yes) or rejected (no)
Launch subscription.
•
Return to idle.
•
If the registration operation runs correctly (Subscription accepted), the telephone is ready for use, and
the radio coverage icon appears.
•
If the registration operation has not been successful, the station proposes launching the subscription
again.
•
Depending on the type of system concerned, registration may require one or more additional operations
on the system.
During registration phase, to improve security and optimize registration in a multi-system environment, the
handset enforces a minimum signal strength level to accept to register to a base station. To achieve the
conditions, it is recommended to perform registration in a place where a base station is in direct visibility
within a 20 m range. If base station is not visible the range shall be lowered.
During registration phase in a multi-system environment, all systems are scanned without priority. The
system is selected when the signal strength is above a certain level and registration matches.
