This is the Analog TV standard for Australia PAL B/G. Press
the down arrow once so
that you can see the screen shot as below
“Output frequency”.
Increase/decrease the values using the arrows
or use the numeric keypad to enter
the frequency output that is desired. Ensure if you enter the value using the numeric keypad
you use the decimal point. The Australian Analogue/Digital frequency table can be seen on the
next page.
NB. The TO-series allows you to set the output frequency across the Australian
terrestrial frequency spectrum(45-860 MHz)as they are fully agile.
Once you have the desired Analog output frequency press transmit
and you will see the
IR LED on the module you are programming flash. This indicates it is receiving the settings
from the programmer. Now press down arrow
to get to the next screen below
“Input
frequency”.
This is the digital input frequency.
Increase/decrease the values using the arrows
or use the numeric keypad to enter
the digital input frequency that is desired. Ensure if you enter the value using the numeric
keypad you use the decimal point. The Australian Analogue/Digital frequency table can be
seen on the next page
Once you have the entered the desired input centre frequency press transmit
and you
will see the LED on the processor you are programming flash twice. This indicates it is
receiving the settings from the programmer. Now press down arrow
to get to the next
screen below.
