QUICK PROGRAMMING GUIDE 912-DM A/V TO DVB-C
ENG
Start/on
Press the Power On key of the PS-011 to start up the
system.
Set the programming switch of the 912-DM module to the ON position. The programming
indicator will now light up and remain lit.
Transcodifi cador 912 QPSK - COFDM
NIT Table
Select series
Main menu
Choose
Select Series
to select the programming series.
OK
912-TP Transmodulator QPSK - PAL
912-DM Modulator A/V to DVB-C
Select series
Select the series:
912-DM Modulator A/V to DVB-C.
OK
Confi gure module
912-DM Modulator A/V to DVB-C
To commence programming the module, select
Confi gure
module
.
OK
Output
Standard
DVB-C
Program by
Canal
Canal
Frecuencia
Select the programming mode for the output of the
module: channel or frequency. Then press T to transmit.
OK+
+OK+T
Channel table
BG CCIR
Select the standard for the output channel. Then press
T to transmit.
OK+
+OK+T
Channel
21
If the output is programmed by channel, it is possible to
enter the channel using the numeric keypad. Alternatively,
you can select a channel from the pull-down list. When
you have confi rmed your choice by pressing OK, press
T to transmit.
T
OK+
+OK+T
or
Frequency
471.25
MHz
If the output is programmed by frequency, enter the
frequency using the numeric keypad. Then press T to
transmit.
T
Attenuation
14
dB
Enter the attenuation at the output of the module
using the numeric keypad. Then press T to transmit.
T
OK+
+OK+T
or
Select the type of spectrum. Then press T to transmit.
OK+
+OK+T
Spectrum
Normal
Inverted
Normal
Select the type of modulation of the output channel. Then
press T to transmit.
OK+
+OK+T
128QAM
Modulation
64QAM
64QAM
32QAM
256QAM
16QAM
Enter the symbol rate of the output signal using the
numeric keypad. Then press T to transmit.
T
Symbol rate
KBd
1000
