ALC Connect Plus AHS616, Руководство пользователя

Страница: 21 / 37

— 19 — — 18 —
ALC CONNECT APP STATUS SCREEN
Basic Operation
Set the following at the Camera’s Advanced Settings:
Admin Password
:
Tap to change the Admin Password.
Device Security Code
:
Tap to change the Device
Security Code.
Cloud Setting:
Any cloud storage criteria will appear here
(i.e. Google Drive). Tap to change/set the cloud storage
information. Videos recorded onto the SD card will also be
transferred to the cloud storage.
Time Zone
:
Tap to select the time zone you are in.
Daylight Saving
:
Tap the switch to select daylight saving
time.
Wi-Fi Setting:
The Wi-Fi setting allows you to choose the
home network and setup the Wi-Fi environment. When
you tap
WI-FI Setting,
the system automatically scans
the nearby network and shows the available Wi-Fi routers
in the list. Choose the Wi-Fi router connected to the home
network and enter the Wi-Fi router password if necessary.
Due to security concerns, it is suggested to use the WPA/
WPA2/WPA2-PSK protocol for Wi-Fi network.
Video Quality:
Tap to set the Video Quality. Tapping
VGA
will allow for faster video streaming, but the picture will not be as clear. Tapping
1080P
will give the best video but will be slow. Tapping
720P
will provide mid speed and
mid video picture.
Camera Location:
Tap location of camera. If selecting indoor, select the frequency used in
your area. North America uses 60Hz, European countries use 50Hz.
Low Light Enhancement:
Tap to set the Low Light Enhancement. 5 will provide the brightest
enhancement and 1 the lowest.
Screen Orientation:
Tap to select the desired screen orientation; Normal, Flip, Mirror or Flip &
Mirror (when installed in a hanging position, make sure to select Flip & Mirror).
Detect Mode:
Tap to set the desired Sensitivity Settings as well as the detection mode as
follows:
OFF:
Turns sensitivity off. No motion detection.
Software
: Uses advanced software. In this setting, set the Day and Night as desired.
Higher will make the camera more sensitive to “less” motion.
Motion Masking:
Not Used..
Format Sd Card:
Tap and then confirm to format the MicroSD card inserted in the camera
Overwrite Sd Card:
Tap this switch to activate. When activated, the camera will delete the
oldest recordings in order to record new files when the MicroSD card is full.
Device Information:
Tap to view the device information, including current firmware version,
total size and free size (space available).
CAMERA SETTINGS
(Camera Available Separately)