ALC Connect Plus AHS616, Руководство пользователя

Страница: 20 / 37

— 18 —
ALC CONNECT APP STATUS SCREEN
Basic Operation
Set the following at the
Device’s Advanced Settings:
Control Hub Siren Volume
:
Tap to set the Control Hub’s
Siren Volume (None, Low or
High).
Control Hub Siren Duration
:
Tap to set the Control Hub’s
Siren Duration (60, 120 or 180
seconds).
Emergency Contact
:
Tap
to set the emergency contact
should the alarm go off. The
default is 911.
Push Notification : Click the
switch to turn this on or off.
This will allow the device to
send you alerts.
Use E-mail : Click the switch to turn email alerts on or off. Click Use E-Mail to enter up to 5
emails for this device to send alerts to.
Arm (Away) : Tap to enter the Arm (Away) screen. Click to add a check-mark next to any
device that you want activated when you arm the system with Arm (Away). Also set the Arm
Delay which is the time you have to get out of the house once the device is armed.
Arm (Stay)
: Tap to enter the Arm (Stay) screen. Click to add a check-mark next to any device
that you want activated when you arm the system with Arm (Stay). Also set the Arm Delay
which is the time you have to get out of the house once the device is armed.
Panic : Tap and then set the devices to activate in Panic mode.
Record
: Tap to set the cameras that will record when the Record feature is activated on this
system.
Network Setup
:
It is recommended to keep this option on so the unit will automatically add
the IP Address, etc. You can de-select it and manually enter this information for using a Static
IP address.
Device Security Setup
:
Tap Modify to change the Device Security Code.
Firmware
:
Tap to see if there is an update available. If there is, tap
Update
to update the
firmware.
Align Date/Time :
Tap to transfer the date, time and time zone from the mobile device to the
system.
About:
Tap to display information about the system such as DID, Firmware, etc.
Replace Battery Mode:
Tap to turn this switch on (red). so you can change batteries in a
device without triggering the tamper detection. After 60 minutes this mode will automatically
turn off.
MAIN SETTINGS