manualshive.com logo in svg

ALC AHS613, Руководство пользователя

Поделиться
Скачать
ALC AHS613 Скачать руководство пользователя страница 28

— 26 —

INSTALLATION

Installation Tips

Night Vision

•   Before you install the system, plan where and how it will be positioned, and where you will 

route the cable that connects the camera to the power adaptor(s). 

• 

Avoid having a direct light source in view of the camera.

• 

Before starting permanent installation, have another person check the camera image 
on the tablet/phone when camera is positioned in the same place it will be permanently 
installed. 

•   If the signal will have to pass through a wall, placing the Wi-Fi router or camera next to a 

window will improve the signal strength, or utilize the built-in repeater in the Power Switch 
(see page 45).

• 

Do not install the camera pointing out of a window. The night-time picture will be unusable 
due to reflection from the night vision LEDs. 

•   As dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from 

the infrared LED and might reduce video quality. Periodically clean the lens glass with a 
soft cloth.

The camera has built-in infrared LEDs to allow you to view at night for 24-hour surveillance. The 
LEDs will automatically activate at night and the picture viewed will change to black and white. 
The night viewing range is up to 15 feet.

WARNING: 

 

It is not recommended to use this camera outdoors.

Содержание AHS613
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды