manualshive.com logo in svg

ALC AHS613, Руководство пользователя

Поделиться
Скачать
ALC AHS613 Скачать руководство пользователя страница 11

— 9 —

— 8 —

The AHS616 is an upgradeable security system that comes with everything you need to start 
protecting your home. You can increase security at any time by adding additional sensors and/
or cameras. The system is easily accessed anywhere in the world via Internet. The free iOS/
Android App allows you to view/record video, turn power switch(es) on/off, activate/deactivate 
the siren manually or automatically. Please read the manual fully to understand all the features 
the system and App contain.
See below for explanation of each device:

The central control of the Secure Home Connect system 
provides communication for remote access, sensors and mobile 
devices. The Control Hub can send out push notifications and 
Emails when a sensor is triggered. 

The Wireless Camera will supply day and night viewing thanks to 
the built-in night vision. Using the free Android or iOS App, you 
can view live at any time, and set it up to record when an event is 
triggered (i.e. window sensor, etc.).

The Motion Detector (PIR) is built for larger area detection, such 
as a living room or entrance. Once motion is detected, the 
Motion Detector can alert the system and activate the Power 
Switch (turning on light), Siren (alert sound) and Camera (view/ 
record), if set.
Note: To conserve battery power, the Motion Detector will be 
temporarily deactivated for two minutes after every trigger event. 

The Power Switch can be controlled via App (On/Off) and set to 
turn on after a Door/Window Sensor or PIR is triggered) or Panic 
button is pressed on the Remote Control. The Power Switch can 
also act as repeater to extend the service range for one single 
device, such as the Indoor Siren. 

The Door/Window Sensor is installed on a door or window and 
when triggered (separated), it can activate the Power Switch (to 
turn on a light, etc.), activate the siren, etc. depending on the 
App settings.

The Indoor Siren can be controlled via the App and Panic button 
on the remote control or triggered by other devices such as 
Camera, Door/Window Sensor and Motion Detector. 

Use the Remote Control to ARM/DISARM the system or set off 
Siren. You can preset the buttons to operate various sequences 
of events with the paired devices.

Control Hub

Wireless 
Camera

Motion
Detector

Power Switch

Door/Window 
Sensor

Indoor Siren

Remote Control

x 1

x 1

x 1

x 3

x 1

x 1

x 1

NA

x 1

x 1

x 1

x 1

x 1

x 1

Adaptor DC 12V/1A Ethernet Cable

Adaptor DC 5V/1.5A

Bracket

Battery AA 1.5V  Sticky Pad Set Wall Mount Set

Bracket

Battery  CR2032 

Sticky pad Set

Screw Set

Adaptor DC 5V/1 A

Bracket 

Screw Set

Battery  CR2032

x 1

x 1

Getting to Know Your Security System

INTRODUCTION

Содержание AHS613
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды