albutt FORGED TINE B808PP, Инструкция и каталог запасных частей

Страница: 9 / 17

1.7 HYDRAULIC SAFETY
CAUTION The hydraulic system is under high pressure.
Ensure that only high-pressure hoses are used to connect supply to the attachments hydraulic
cylinder. Check hoses regularly and renew any that are damaged or worn.
Hydraulic supply
must not exceed 207 bar & 80 L/min
Before working on the hydraulics lower the Buckrake, release the pressure from the system
and stop the tractor engine.
When connecting hydraulic rams make sure that the hydraulic hoses are coupled correctly.
Pressure should be released from the system both on the tractor and on the implement side
prior to coupling the hoses to the tractor hydraulics.
CAUTION Hydraulic oil forced out under pressure can break the skin and cause severe injury.
In the event of a hydraulic oil leak stop the tractor flow immediately. DO NOT PUT HANDS
NEAR A LEAKING PIPE.
1.8 MAINTENANCE
As a rule, disengage the driving system and stop the engine prior to carrying out maintenance,
servicing, cleaning or repair work.
ALWAYS remove the ignition key.
Prop the machine with appropriate supports before carrying out any maintenance work.
The manufacturer will not be responsible for any damages or injuries caused by unauthorised
repair, alterations or mishandling of the product.
Maintain product with care. Check periodically for damage that would affect the safe
operation of the implement.
ALWAYS ensure all warning stickers are kept clean and in good condition.
Regularly check the bolts at the hinge points and tighten if necessary.
Regularly lubricate the hydraulic cylinder and hinges using clean grease.
Cover the chromed area of the hydraulic cylinder with a layer of grease during prolonged
periods of inactivity.
www.albutt.com | 01242 620 252 | keith@albutt.co.uk