Albrecht JACK PCL BRACE Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 32

Albrecht JACK PCL BRACE Скачать руководство пользователя страница 6

1.10. Safety Instructions

The optimal effect of the brace is only
achieved when used correctly.

•

The brace must only be used in the intact,
complete and mechanically undamaged
condition and with complete and intact pads
and straps. This must be verified by the user
before each usage.

•

Opening or removing one or more straps,
as well as excessive loosening of the straps
when using the brace leads to a reduction of
the therapeutic effect of the brace and may
lead to injury.

•

The brace must not be worn over open
wounds.

•

The skin should be free of oils, grease, gels
or other debris, to prevent reactions with the
skin or the structure of the material.

•

The orthosis should fit firmly but not
too tight, so as not to restrict the blood
circulation and adversely affect nerve and
lymph vessels. Excessive compression is to be
avoided.

•

Combination with other products is currently
not provided for or is to be agreed with the
manufacturer in writing.

•

The brace is not intended for single use,
but is intended for multiple use by a single
person.

•

The product as delivered is not sterile.

•

Contact your physician immediately in the
event of an allergic reaction.

•

Please note that cushioned sections can heat
up under direct sunlight. Protect the orthosis
from direct sunlight if necessary.

•

Currently there is no test for flammability.
Exercise caution when using the orthosis
in the direct vicinity of open flames such as
lighters and cigarettes.

1.11. Warranty

In addition to the legal warranty, we provide
a 6-month durability guarantee for the
orthosis. If properly used, this guarantees
that the orthosis will function without fault.
This excludes the padding and straps, which
are usually liable to a certain amount of
wear and tear. This kind of wear and tear
does not represent a product defect. This
manufacturer’s warranty is subject to the
condition that the orthosis is used as a medical
rehabilitation device and for no other purpose
than that described in the instructions for
use. Changes to the orthosis or the removal /
damage to the quality management seal will
invalidate the warranty.

6

Jack PCL Brace

User Instructions

«
...
4
5
6
7
8
...
»

Содержание JACK PCL BRACE

































Отзывы:

Нет отзывов