Albrecht JACK PCL BRACE Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 32

Albrecht JACK PCL BRACE Скачать руководство пользователя страница 4

1. Introduction

1.1. Foreword

Functional braces relief and stabilize joints
and ligaments after trauma and surgery. They
support joints and ligaments in the healing
process while maintaining the natural range of
motion.

Whilst protecting fragile joints and ligaments
during rehabilitation, our functional braces are
also designed to allow a guided, step by step
return to full physiological mobility.

1.2. Customer information

For your own safety please read through these
User Instructions carefully and accurately
before using the brace. The instructions, notes
and procedures must be read and understood
thoroughly in order to benefit from the correct
operation and use of the device. If anything
in the User Instructions is not clear, or any
instructions, operating procedures or safety
information is not fully understandable, please
contact the appropriate specialist retailer or
albrecht GmbH directly, before you use the
brace. This particularly applies to the safety
instructions.

1.3. Mode of operation

The

Jack PCL Brace

overcomes the gravity

of the lower leg to relieve the posterior
cruciate ligament. The translation force may
be adjusted to the leg and weight of the
patient through setting the tension on both
sides of the brace. Hereby the detrimental
effects of the muscle and gravitation forces
can be counteracted.

The slipping of the

tibia into the posterior drawer position is
prevented.

1.4. Application

The brace has been designed exclusively for
the orthotic treatment of the knee joint and
for contact with intact skin.

1.5. Scope of delivery

Please check the completeness of the brace at
delivery.

•

Brace with padding and straps

•

albrecht GmbH hexagon key

•

User Instructions

1.6. Declaration of conformity

The albrecht GmbH company as manufacturer
with sole responsibility declares the conformity
of the

Jack PCL Brace

with European Council

Directive 93/42/EEC for medical devices.

4

Jack PCL Brace

User Instructions

«
...
2
3
4
5
6
...
»

Содержание JACK PCL BRACE

































Отзывы:

Нет отзывов