Service Address and Technical Hotline (for units sold in Germany)
Alan Electronics GmbH
Service
Daimlerstraße 1K
63303 Dreieich
Germany
Contact our service hotline by phone
+49 (0) 6103 9481 66
(regular costs for German fixed network)
or e-mail at
Operation:
1.Place the charging case on a flat surface.
2.Connect the supplied power cord to the power
connector
3.Plug the other end into an electrical outlet.
4.Switch the charger on with the mains switch on the
outside of the unit.
5.Insert the switched-off ATR / ATT400 into the charging
stations. The charging contacts are located at the bottom
of the device.
6.The charging process takes about 3-4 hours when the
battery is completely discharged. When fully charged, the
control light on the ATT / ATR400 changes from "red" to
"green".
Notes:
The charging case and the batteries of the transmitter and
receiver may warm up during charging. Make sure that the
heat can escape:
•
The air must be able to circulate freely through the
ventilation openings.
•
Do not expose the charging case to heat sources
or direct sunlight.
•
The lid of the case should not be closed during the
charging process
Declaration of Conformity
Hereby, Alan Electronics GmbH declares that the charging case for the Albrecht ATR400
system is in compliance with Directive 2014/30/EC. The full text of the EU declaration of
conformity is available at the following internet address:
http://service.alan-electronics.de/CE-Papiere/
Albrecht ATR400 and ATT400 charging case
4.
