Albrecht AE33 H, Руководство пользователя

Страница: 53 / 84

English 53
CARE AND MAINTENANCE
Keep the scanner dry. If it gets wet, wipe it dry immediately. Use and
store the scanner only in normal temperature environments. Handle the
scanner carefully: do not drop it. Keep the scanner away from dust and
dirt, and wipe it with a damp cloth occasionally to keep it looking new.
GENERAL USE
•
Always write down the programmed frequencies in the event
of memory loss.
•
If memory is lost, simply reprogram each channel.
The display shows blank digits - - - - - - in all channels when
there has been a memory loss.
•
Always press each button firmly until you hear the entry tone
for that key entry.
LOCATION
•
Do not use the scanner in high-moisture environments such
as the kitchen or bathroom.
•
Avoid placing the unit in direct sunlight or near heating elements
or vents.
•
If the scanner receives strong interference or electrical noise,
move it or its antenna away from the source of the noise. If
possible, a higher elevation might provide better reception.
•
Also try changing the height or angle of the antenna.
CLEANING
•
Clean the outside of the scanner with a mild detergent.
•
To prevent scratches, do not use abrasive cleaners or
solvents. Be careful not to rub the LCD window.
•
Do not use excessive amounts of water.
BIRDIES
All radios can receive “birdies” (undesired signals). If your scanner stops
during Scan mode and no sound is heard, it might be receiving a birdie.
Birdies are internally generated signals inherent in the electronics of the
receiver.
•
Press
▲/▼ to resume scanning.
•
Or press ( L/O) to lock out the channel or frequency.