Albixon HIDROLIFE, Инструкция по установке и эксплуатации

Страница: 2 / 8

2
/ Salt electrolysis Hidrolife
1.
Description
2.
System installation
Item Product description
1. Electrolysis
2. RCA flow detector
3. Main connection 230 V
4. ON/OFF switch
5. Fuse for device and cell 4 A
6. Fuse relays 4 A
Item Product description
7. Electrolysis cell
8. RCA flow detector
9. Cell connector
10. Cell housing
11. Flow/gas detector (internal)
7
10
8
9
11
5
6
4
1
2 3
110-230V
Electronic box
Cell
Item Product description
1. Filtration pump timer *
2. Silex / glass / diatom filter
3. Recirculation pump
4. Electronic box
5. Electrolysis cell (always in vertical position)
6. pH probe (optional - for models with pH control)
7. redoX probe (optional - for models with redoX control)
8. Acid dosing pump (optional - for models with pH control)
9. Acid injector (optional - for models with pH control)
10. Hydrochloric acid container (optional, for models with pH control, not supplied with unit)
11. Other pool equipment
12. Module RF or RF/WIFI or WIFI
13. Free chlorine control
Water treatment system and a controller for swimming pools.
Water treatment: The salt water electrolysis produces chlorine from a base of salt water of low salinity. The
electrolysis cell attains a production of sodium hypochlorite (liquid chlorine) from 3g salt per liter. The chlorine
combats and eliminates bacteria, virus, pathogenic agents and oxidizes organic matter present in the water.
The used sodium hypochlorite reconverts into salt after a few hours. The system controls centrally all the
components of your pool, ensuring an efficient interaction.
Electrical consumption
It’s recommended to use a time delay circuit
breaker of 25 A for domestic devices and a time
delay circuit breaker of 40 A for industrial devices.
In case of sharing the power supply with other
devices please consult a technician in order to
dimension a correct installation.
Domestic devices
Product Max. consumption g Cl
2
/h
SAL 16 130 W 16
* Filtration control by external timer
* Filtration control by internal timer
Relay FILTER PUMP 110-230 V
Filtration mode:
See section 5 -
Filtration of the
General Installation
Guide
Filtration mode:
“Manual/ON”
3
1
2
4
6
8
5
7
9
10
11
12
110-230 V
13