Installation of Tab Washers
4200-106
7-1
Revision 3
7.
Installation of Tab Washers
Tab washers allow connection of the monitoring system to the battery. Standard tab washers
accommodate 5/16” hardware.
The tab washer location and quantity depend on the system
configuration. The actual placement of these tab washers in relation to the battery post and existing
hardware is critical. In instances where a single load tab washer and a sense tab washer(s) is required,
the load tab washer should be placed closest to the cell post and underneath the sense tab washer. The
following figures illustrate some common applications.
Figure 2 - Exposed Post Tab Washer Assembly
