10
2.4
Driving Switch [2]
After switching on and selecting the desired direction of
travel (see chapter 2.1 and 2.2) the scalamobil is set in
motion with the driving switch [2] .
· Through constant pressure on the driving switch [2] the
scalamobil moves in the selected direction.
· Releasing the driving switch [2] causes the scalamobil to
stop instantly.
· When single-step switch is activated (see chapter 2.6.1),
the scalamobil travels one complete climbing cycle over
a single step and then stops.
· The driving switch [2] then has to be released and pressed
again to travel up the next step.
· When single-step switch is not activated a continuous
operation takes place until the driving switch [2] is
released.
