5.7
Picking up Loads with the Height-Adjustable Shovel
If your
CargoMaster
is equipped with the optional,
height-adjustable shovel, you need to put the shovel in the
position at which the load’s center of gravity is positioned
between the big wheels and the smaller supporting wheels
as described in the chapter 5.3 “Parking with a Load.”
To adjust the height-adjustable shovel, unlock the particu-
larly provided spring-urged stop bolts (see Figure 19).
Pull out the stop bolt as shown in Figure 20.
Turn it by 90° (see Figure 21), at which point the stop bolt
snaps into a small indentation securing it against turning at
its own.
Adjust the shovel to the appropriate position and turn the
stop bolts again by 90°, at which point they snap back into
their groove.
You might have to slide the shovel back and forth in its gui-
ding device to make sure that the stop bolts snap into their
grooves securely.
+
The nose must be fully inserted into the groove, see Figure 19
CargoMaster
A130
GB
7/98
FIGURE 20
FIGURE 21
FIGURE 22
FIGURE 19
