Albemarle 41 CONVERTIBLE, Руководство пользователя, Страница: 24 / 138

410 Convertible
24
Lubrication should be performed as often as necessary to keep
the system operating smoothly.
Control system adjustments may become necessary. If adjust-
ment becomes necessary, see your Albemarle dealer.
D O N OT AT T E M P T C O N T R O L S Y S T E M
ADJUSTMENTS UNLESS YOU ARE FAMILIAR WITH
CONTROL SYSTEM SERVICING PROCEDURES.
CAN CAUSE LOSS OF CONTROL AND SEVERE
ENGINE OR TRANSMISSION DAMAGE.
Steering System Maintenance
A periodic inspection of all steering hoses, linkage and helm
assemblies should be made. Signs of corrosion, cracking,
loosening of fastenings, excessive wear, or deterioration should
be corrected immediately.
Generally, periodic lubrication of all moving parts and con-
nections with a light waterproof grease is in order. Failure to
do so could lead to steering system failure that would result
in loss of control.
Check the hydraulic hoses and fittings for chaffing, rub marks
and leaks. Replace if necessary.
The power steering system is equipped with a spin on cartridge
stye oil filter that keeps the system free from contaminants.
The filter should be changed at 50 hours and once a year
thereafter.
The steering fluid level in the reservoir should be checked
frequently and maintained at or near the maximum level. The
pressure in the reservoir also should be checked and kept at 25
to 35 PSI. If steering fluid is required, make sure you relive
the pressure in the reservoir and follow the instructions in the
steering system owner’s manual exactly. A bicycle pump can
be used to pressurize the system.
When new, or after repairs, hydraulic steering systems may
need to have all air purged from the system. Only use hydraulic
steering fluid recommended by the steering system manufac-
turer. Difficult steering and premature seal failure can result
if the wrong fluid is used in the steering system. Review the
information provided by the steering system manufacturer
for proper specifications and details on system service and
maintenance.
The boat also should be inspected periodically for leakage
around the rudder ports. The rudder ports contain a lip seal
that provides 100% water tight operation. The seals are self-
lubricating and require no maintenance. If a rudder port is
Steering Cylinder and Rudder Port
Steering System Reservoir
found to be leaking, please contact your Albemarle dealer or
the Albemarle Customer Service Department.
If the rudders have to be removed for any reason, the red plastic
seal protector must be used to prevent the keyway in the rud-
der shaft from damaging the lip seal in the rudder port. The
seal protectors are shipped with the boat. Always inspect the
rudder ports for leakage when the boat is launched and at least
once a month thereafter.