PX865PEL-800
16
Audio Connectors
ader: CD-IN
his header is used to connect to a CD-ROM / DVD audio cable.
/Philips Digital Interface) Header: SPDIF
/PDIF is a recent audio transfer file format, which provides high quality audio using optical fiber
d digita
audio input
rough the SPDIF header. One way you would use this header is by using an SPDIF bracket
tached to your computer. This bracket will have a cable that you can attach to the SPDIF header.
his bracket will also have an RCA connector, similar to that used with most consumer audio
roducts. Using the RCA connector, the data can then be output to and input from an S/PDIF device.
he devices that are receiving and sending information from this header must be S/PDIF compliant
r optimal effect. Note that the SPDIF bracket is optional in the packaging that comes with this
mainboard.
Front Panel
your computer case has been designed with embedded audio equipment. You can attach these
mponents to the FRONT_AUDIO panel of the mainboard. First remove the jumper caps covering
. Use pins 9,5 to connect
the FRONT_AUDIO panel, do not remove the jumper
This mainboard provides three connectors as part of its audio Subsystem.
CD-ROM Audio-In He
T
S/PDIF (Sony
S
an
l signals. This mainboard is capable of delivering audio output and receiving
th
at
T
p
T
fo
Audio Header: FRONT AUDIO
If
co
the FRONT_AUDIO pins. Use pins 1, 3 to connect to the case microphone
to the earphone. If you do not intend to use
caps.
FRONT AUDIO
CD-IN
1
1
2
2
3
3
4
4
5
Left In
+5V
NC
SPD_OUT
Ground
SPD_IN
Right In
Ground
Ground
MIC_VREF
Front out_R
Front out_L
NC
NC
Rear out_L
Rear out_R
+5V
SPDIF
1 2
MIC
Ground
In
te
l
82
86
5P
L
A
N
CHIP
W
in
bond
W
8362
7H
F
1
BI
O
S
In
te
l
IC
H
5
1
1
S
o
ck
et
478
A
LC
650
1
1
1
1
2
9
10
1
2
2
11
9 10
1 2
1 2
1
1
Attention
If the jumper caps are in place, jumper cap 1 is on
pin 5, pin 6 and jumper cap2 is on pin 9, pin 10.