PX865PEL-800
9
If you are using DIMM2 and DIMM3 simultaneously, you must use single-sided memory
nstall into
that you install
DIMM2 DIMM3
modules with the total memory used by these two sockets not exceeding 1 GB.
If you will be using double-sided DDR DIMM modules, you can only install up to 2 modules.
When using 2 double-sided DDR DIMM modules, we recommend that you them i
DIMM1 and DIMM2.
If you are installing only 1 double-sided DDR DIMM module, we recommend
it into either DIMM1 or DIMM2.
The following table contains a complete list of possible memory configurations
：
DIMM1
Single-sided X
X
Single-sided Single-sided
X
Single-sided X Single-sided
S
S
S
ingle-sided
ingle-sided
ingle-sided
X S
ingl
ided
e-s
X
X Single-sided
Single-sided
X X
Single-sided
Double-sided X
X
X Double-sided X
Double-sided Double-sided
X
Single-sided Double-sided
X
Double-sided Sing
ided
le-s
Sing
ided
le-s
Double-sided Single-sided
X
Double-sided X Single-sided
RAM Module Installatio
1.
Pull the
bs on each s
y from th
2.
Match
e button of
ng pattern in the
nserted properly.
Lower
thumbs until the
4.
n:
white plastic ta
ide of the slot awa
e slot.
the notch on th
the R M module with th
A
is i
e correspondi
DIMM slot. This ensures that the module
3.
the RAM module into the DIMM Slot and press firmly using both
module snaps into place.
Repeat steps 1 & 2 for the remaining RAM modules.
＊
The pictures above are for reference only.