PX865PEC PRO
Headers & Jumpers
Front USB Headers: USB3/ USB4
This mainboard provides 2 USB headers on the board allowing for 4 additional USB ports. To make
use of these headers, you must attach a USB bracket/cable with USB ports (some models will come
packaged with a USB 4-port bracket-cable). The optionally packaged bracket will have two
connectors that you can connect to the headers (USB3, USB4). The other end (bracket containing the
USB ports) is attached to the computer casing.
river.
If you are using a USB 2.0 device with Windows® 2000/XP, you will need to install
the USB 2.0 driver from the Microsoft® website. If you are using Service pack 1
(or later) for Windows® XP, and using Service pack4 (or later) for Windows®
2000, you will not have to install the d
USB POWER Switch: USBPWR1/2/3/4
These jumpers allow you to set your USB power at +5V or +5VSB. You will need to set to
5V when
+
using a USB hard disk or +5VSB to wake up your computer.
14
