PM845G Series Mainboard
35
UR2 Duplex Mode
Select the value required by the IR device connected to the IR port. Full-duplex mode
permits simultaneous two-direction transmission. Half-duplex mode permits transmission
in one direction only at a time. Options: Half (default), Full.
Use IR Pins
Select one of the two options to function. Options: RxD2.Txd2, IR-Rx2Tx2 (default).
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with which I/O
Address.Options: Disabled, 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7.
Parallel Port Mode
The default value is ECP. ECP means that using Parallel port as Extended Capabilities
Port.
EPP
Using Parallel Port as Enhanced Parallel Port.
SPP
Using Parallel port as Standard Printer Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
Normal
EPP Mode Select
Select EPP port type 1.7 or 1.9 (default).
ECP Mode Use DMA
Select a DMA Channel for the port. Options: 3 (default), 1.
Game Port Address
Set the Game Port I/O Address. Options: Disabled, 201 (default), 209.
Midi Port Address
Set Midi Port Base I/O Address. Options: Disabled, 330, 300 (default), 290.
Midi Port IRQ
Set the Midi Port IRQ. Options: 5, 10 (default).
