KX400-8XV V2.0 Series
31
Video RAM Cacheable
Select “Enabled” to allow caching of the video RAM which may improve performance. If any other
program writes to this memory area, a system error may result. Options: Enabled
、
Disabled (default)
PnP/PCI Configurations
PNP OS Installed
When set to “YES”, BIOS will only initialize the PnP cards used for the boot sequence (VGA, IDE,
SCSI). The rest of the cards will be initialized by the PnP operating system like Windows
®
95. When
set to “NO”, BIOS will initialize all the PnP cards. For non-PnP operating systems (DOS, Netware),
this option must be set to “NO”.
Options: No (default)
、
Yes
Reset Configuration Data
Select “Enabled” to reset the Extended System Configuration Data (ESCD) if you have installed a
new add-on card and the system reconfiguration has caused such a serious conflict that the OS cannot
boot. Options: Disabled (default)
、
Enabled
Resources Controlled By
BIOS can automatically configure all the boot and Plug and Play compatible devices. If you choose
Auto, you will not be able to manually assign IRQ DMA and memory base address fields, since
BIOS automatically assigns them. Options: Auto <ESCD> (default)
、
Manual
IRQ Resources
When resources are controlled manually, you can assign each system interrupt a type, depending on
the type of device using the interrupt. This is only configurable when “Resources Controlled By” is
set to “Manual”.
IRQ-3
assigned
to:
PCI
device
IRQ-4
assigned
to:
PCI
device
IRQ-5
assigned
to:
PCI
device
IRQ-7
assigned
to:
PCI
device
IRQ-9
assigned
to:
PCI
device
IRQ-10
assigned
to:
PCI
device
IRQ-11
assigned
to:
PCI
device
IRQ-12
assigned
to:
PCI
device
IRQ-14
assigned
to:
PCI
device
IRQ-15
assigned
to:
PCI
device
