Albatron KX18D PRO II Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 58

background image

KX18D Series

12

Serial and Parallel Interface Ports

The mainboard comes equipped with one serial port and one parallel port on the back panel. These
interface ports will be explained below.

Parallel Interface Port: PRT

The parallel port on your system has a 25-pin, DB25 connector and is used to interface with parallel
printers and other devices using a parallel interface.

The Serial Interface: COM1

The serial interface port is sometimes referred to as an RS-232 port or an asynchronous
communication port. Mice, modems and other peripheral devices can be connected to a serial port.

Audio Port Connectors

Speaker Out

is used to connect to speakers or

headphones. If the Super 5.1 driver is enabled the Speaker
Out becomes the Front Speaker.

Line In

can be connected to an external CD player, Tape

player or other audio devices for audio input. If the Super
5.1 driver is enabled Line In becomes the Rear Speaker.

Mic In

is used to connect to a microphone. If the Super 5.1

driver is enabled the Mic In becomes the Subwoofer/
Center out.

This mainboard supports Super 5.1 Channel Audio effects which turns
your standard Speaker Out, Lin In, Mic In audio connectors into a 6
channel audio system. See Appendix I for more information.

Printer Port

COM1

Speaker
Out

Game Port

Mic In

Line In

«
...
14
15
16
17
18
...
»

Содержание KX18D PRO II



























































Отзывы:

Нет отзывов

Похожие инструкции для KX18D PRO II

Бренд: Xeltek Страницы: 19

Бренд: Biostar Страницы: 49

Бренд: ECS Страницы: 56

Бренд: JETWAY Страницы: 47

Бренд: Sundance Spas Страницы: 21

VECTOR 1 MOTHERBOARD

Бренд: Vector Graphic Страницы: 14

BaseTravel 401 S

Бренд: Torqeedo Страницы: 32

SUPER P4DPL-8GM

Бренд: Supero Страницы: 86

Бренд: ASROCK Страницы: 2

Бренд: RIB Страницы: 12

Бренд: IEI Technology Страницы: 198

Бренд: Commell Страницы: 60

Бренд: Acrosser Technology Страницы: 3

Бренд: Supermicro Страницы: 105

Бренд: BOSER Technology Страницы: 38

Бренд: Semtech Страницы: 16

CAES UT65CML8X8FD-EVB-UM

Бренд: COBHAM Страницы: 20

Бренд: ST Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды