Mainboard KM51G-754
Pin
Assignment
1 Ground
2 Power
(+12V)
1
JCFAN1/ JSFAN1
3
FAN RPM rate sense
On most fan power cord, the black wire of the fan cable is the “ground”
and should be attached to pin-1 of the header.
Attention
You can avoid damaging your CPU due to high temperatures with
proper cooling equipment. It is recommended that attach a cooling fan
on top of your CPU. Use the JCFAN1 header to attach the fan cord.
Memory Installation: DIMM1/2
The KM51G-754 provides two DIMM (Dual In-Line Memory Modules) sockets. It allows you to
install 184-pin, non-ECC unbuffered, DDR400(PC3200)/DDR333(2700)/DDR266(PC2100)
SDRAMs, and supports to install a total memory capacity of 2GB.
Memory Setup Steps:
The following instructions explain how to set memories onto the DIMM sockets for this
mainboard.
1. Pull the white plastic tabs at both ends of the socket away.
2. Align a
memory
on the socket such that the notch on the memory matches the break on the socket.
6
