Albatron KI51PV-754 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 58

background image

Mainboard KI51PV-754

30

SATA1/2 Primary/ Secondary RAID

This allows you to enable or disable the RAID function for the SATA1/2 Primary/Secondary

device. Options: Enabled, Disabled (Default)

Serial-ATA 1/2

This item allows you to enable or disable the SATA1/2 device.
Options: Enabled (Default), Disabled.

Onboard Device

If you highlight the “Onboard Device” label and then press the enter key, it will take you to a

submenu with the following options:

OnChip USB

This option should be enabled if your system has a USB port installed on the system board. You

will need to disable this feature if you add a higher performance controller.
Options: V1.1+V2.0 (Default), Disabled, V1.1.

USB Memory Type

This option allows you to set your USB Memory Type.
Options: SHADOW, Base Memory (640k) (Default).

USB Keyboard Support

This option allows you to enable the USB attached keyboards and storages.

Options: Disabled (Default), Enabled.

AC97 Audio

This option allows you to control the onboard AC’97 audio.
Options: Enabled (Default), Disabled.

MAC Lan

This option allows you to control the onboard LAN device. Options: Enabled (Default), Disabled.

MAC Media Interface

This option allows you to control MAC Media Interface. Options: Pin Strap (Default), MII, RGMII

Onboard I/O Chip Setup

If you highlight the “Onboard I/O Chip Setup” label and then press the enter key, it will take you

to a submenu with the following options:

Power On Function

This option allows you to select a method of awakening the system from sleep mode.
Options: Hot KEY, Mouse Left, Mouse Right, Any KEY, BUTTON ONLY (Default), Keyboard 98.

«
...
32
33
34
35
36
...
»

Содержание KI51PV-754



























































Отзывы:

Нет отзывов

Похожие инструкции для KI51PV-754

Бренд: Aaeon Страницы: 100

Бренд: Aaeon Страницы: 120

Бренд: Aaeon Страницы: 116

Бренд: Aaeon Страницы: 119

Бренд: Aaeon Страницы: 111

Бренд: Aaeon Страницы: 106

Бренд: Aaeon Страницы: 48

Бренд: Aaeon Страницы: 44

ASC Bridge Board

Бренд: Lattice Semiconductor Страницы: 25

Бренд: Intertec Components Страницы: 3

Бренд: Gigabyte Страницы: 93

Бренд: Texas Instruments Страницы: 47

Бренд: IBASE Technology Страницы: 58

Бренд: ST Страницы: 11

Бренд: C&T Solution Страницы: 65

microComponents mp6-XEVA

Бренд: Bartels Mikrotechnik Страницы: 9

Бренд: Gigabyte Страницы: 80

Бренд: Microchip Technology Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды