Albalá Ingenieros HAM3000C03, Руководство пользователя, Страница: 14 / 50

Albalá Ingenieros | Manual HAM3000C03
• The HAM3000C03 module and the mounting frame should always be
installed, maintained, operated and removed by personnel with sufficient
technical qualifications. The equipment should never be placed in damp
areas, near splashing liquid, or in explosive or corrosive atmospheres.
Neither modules nor mounting frames can be used in applications that
could endanger human life.
3.3. Environmental considerations
This symbol indicates that this equipment must be deposited at a collection
point for proper waste treatment once it has reached the end of its useful
life.
3.4. Power considerations
A three unit UR3000 mounting frame cannot house more that 8 HAM3000C03 modules,
and they must be installed as far apart as possible to help with ventilation and heat
dissipation. Empty mounting frame bays can be used as long as the maximum power
supply capability is not exceeded. Please check the technical manuals of the installed
power supply and modules.
A single unit UR3100 mounting frame cannot house more that 3 HAM3000C03
modules, following the same criteria as the three unit mounting frame, and preferably
leaving the central bay empty.
The UR3000 mounting frame does not include forced ventilation, however heat
generated inside the rack cabinet where the frame is housed must be extracted.
Otherwise, the increase of internal temperature may cause module malfunction or even
damage.
3.5. Installing the module in the mounting frame
The steps needed to install the HAM3000C03 module with the rear board in the
mounting frame are:
1 - Disconnect all power cords from the power supplies of the mounting frame.
2 - Remove the blank panels covering the front and rear of the empty bays chosen for
installing the HAM3000C03 in the mounting frame.
3 - Install the HDE3000P24 rear board ensuring that its 12-pin connectors are properly
aligned with the mounting frame´s mating connectors. Check that the orientation of
the board is correct by looking at the placement of the text printed on it according to
the illustration below.
14