Albalá Ingenieros DSW3000C02, Руководство пользователя, Страница: 20 / 32

Albalá Ingenieros | Manual DSW3000C03
In the MODE box:
FULL AUTO: Green. This LED lights up when the operating mode selected is
Automatic.
HALF AUTO: Green. This LED lights up when the operating mode selected is
Semiautomatic.
If neither of these two LEDs is lit then the operating mode is Manual.
SELECT: Pushbutton. This button is used to select the operating mode. A
sustained press of this button changes the operating mode. In
Manual Mode, brief presses of this button change the input
selected. The operating mode selected using this button is stored
in non-volatile memory and is restored in the case of a power
supply failure.
In the SEL. INPUT box:
MAIN: Green. This LED lights up when the main input is selected (MAIN
IN).
RESERVE: Green. This LED lights up when the reserve input is selected (RES
IN).
AUXILIAR: Green. This LED lights up when the auxiliary input is selected (AUX
IN).
Information regarding the input selected is also available via the GPI connector on the
SEL. MAIN and SEL. RES. terminals.
In the INPUT FAIL box:
MAIN: Red. This LED lights up when no signal is present at the (MAIN IN)
input or the corresponding GPI error input (MAIN FAIL IN) for the
main input is activated.
RESERVE: Red. This LED lights up when no signal is present at the (RES IN)
input or the corresponding GPI error input (RES FAIL IN) for the
main input is activated.
AUXILIAR: Red. This LED lights up when no signal is present at the (AUX IN)
input or the corresponding GPI error input (AUX FAIL IN) for the
main input is activated.
Information regarding the input error signals is also available via the GPI connector on
the MAIN FAIL OUT, RES. FAIL OUT and AUX. FAIL OUT terminals.
In the ALARM box:
FAILURE: Red. Alarm indicator. This LED blinks when the input selected
changes.
RESET: Pushbutton. A brief press of this button silences the audible beep
20